I made this using Crafty Secrets Products!! Love their stuff!!
Join me on my creative journey!
2/16/2010
2/15/2010
Well I think I'm slowly getting this blog thing worked out??? I have lots I want to add, I just hope this new template is going to support what I'd like to post!
Here are the projects I created for the "BE MY VALENTINE" event at Scrapbook Heaven. I had alot of fun doing these and a full tutorial with videos will be posted as soon as the event is over, however if you'd like to know how to make these now, go to http://www.scrapbookheavenga.com/ there are a ton of bonus items there that I do think you will find fun and interesting to make!!
Here are the projects I created for the "BE MY VALENTINE" event at Scrapbook Heaven. I had alot of fun doing these and a full tutorial with videos will be posted as soon as the event is over, however if you'd like to know how to make these now, go to http://www.scrapbookheavenga.com/ there are a ton of bonus items there that I do think you will find fun and interesting to make!!
2/13/2010
Valentine Sucker Pouch
Valentine “Sucker” Container
http://www.youtube.com/watch?v=ZlItHcyKOMo
Supplies: 1 – 8 ½ X 11 cardstock
1 - patterned paper 3 ½ X 11 inch
Border punch
Adhesive, ribbon, eyelet, ink and double sided sticky tape
Directions:
1. Cut a piece of cardstock 5”X 11”.
2. Punch the “long” edges of your 5”X11” cardstock. Ink the edges.
3. Cut patterned paper 3 ½” X 11”. Ink the edges if desired.
4. Score both the cardstock and patterned papers as follows.
5. Punch small holes thru cardstock and patterned paper at the same time, as indicated above.
6.Adhere your patterned paper down to your cardstock.
Insert eyelet into the single hole edge.
7. Place double sided sticky tape as shown!
8. Fold your box over, remove sticky tape and place in position.
9. Cut out Valentine “Sweet” tag and adhere to the front of pouch!
10. Attach ribbon, tie into a bow.
http://www.youtube.com/watch?v=ZlItHcyKOMo
Supplies: 1 – 8 ½ X 11 cardstock
1 - patterned paper 3 ½ X 11 inch
Border punch
Adhesive, ribbon, eyelet, ink and double sided sticky tape
Directions:
1. Cut a piece of cardstock 5”X 11”.
2. Punch the “long” edges of your 5”X11” cardstock. Ink the edges.
3. Cut patterned paper 3 ½” X 11”. Ink the edges if desired.
4. Score both the cardstock and patterned papers as follows.
5. Punch small holes thru cardstock and patterned paper at the same time, as indicated above.
6.Adhere your patterned paper down to your cardstock.
Insert eyelet into the single hole edge.
7. Place double sided sticky tape as shown!
8. Fold your box over, remove sticky tape and place in position.
9. Cut out Valentine “Sweet” tag and adhere to the front of pouch!
10. Attach ribbon, tie into a bow.
Valentine Gift Box
Valentine Gift Box
http://www.youtube.com/watch?v=S0oQdlc6ZSw
http://www.youtube.com/watch?v=dkDyPDo_AYk
Box Supplies:
2 – 12X12 sheets of cardboard
Transparency sheet clear or hambly watercolor or mulberry paper
Glue
Paint , paint brush
Utility knife
Double sided sticky tape
Sandpaper
Rub-ons , ribbon, large decorative button, ink
Directions :
1.Cut 2 – 7 X 7 inch squares out of cardboard. Trace and cut a heart shape from one of the 7X7 inch squares and set aside. Heart template supplied.
2.Cut 4 – 6 ½ X 1 ½ in rectangles out of cardboard. (label these pieces "6.5") frame for bottom of box.
3.Cut 4 – 6 6/8 X 1 ½ in rectangles out of cardboard. (label these pieces "6.75") frame for top of box.
4.Score all 8 rectangles on “one long edge” and “one short edge” of each rectangle, ½ inch.
If you are using heavy cardboard, you only need to score lightly “once” with your cutter.
DO NOT BEND BACK AND FORTH.ONLY BEND ONCE TO FORM BOX EDGE.
NOTE: VERY IMPORTANT
Make sure all your cuts and score lines are scored on the "same end" of each piece, this is necessary for when you piece your box frame together.
5. With your 4 scored “6.5” rectangles, glue them end to end to form a square. Set aside. ( One scored edge to a straight edge, one scored edge to the another straight edge until all four pieces are connected, join together to form a square).
6.With your 4 scored “6.75” rectangles, glue all your short end edges, end to end to form a square.
Set aside.
7.Glue and center your “6.5” rectangles to the bottom of your 7 X 7 inch squares. Let dry.
8. Glue and center your “6.75” rectangles to the heart shaped 7 X 7 inch square. Let dry.
9.Paint your box, set aside to dry.
10.Cut your transparency into a 6 1/4 X 6 1/4 inch square, adhere rub-on’s or embellish into desired design!
11.Put double side sticky tape on your transparency close to the outside egde as possible, the part that will be facing out and attach to the backside of the heart shaped lid.
12.Ink your box edges.
13.Add ribbon, buttons, rub-ons to the outside of your box as desired.
14.The box can be lined with patterned paper, felt or tissue paper.
http://www.youtube.com/watch?v=S0oQdlc6ZSw
http://www.youtube.com/watch?v=dkDyPDo_AYk
Box Supplies:
2 – 12X12 sheets of cardboard
Transparency sheet clear or hambly watercolor or mulberry paper
Glue
Paint , paint brush
Utility knife
Double sided sticky tape
Sandpaper
Rub-ons , ribbon, large decorative button, ink
Directions :
1.Cut 2 – 7 X 7 inch squares out of cardboard. Trace and cut a heart shape from one of the 7X7 inch squares and set aside. Heart template supplied.
2.Cut 4 – 6 ½ X 1 ½ in rectangles out of cardboard. (label these pieces "6.5") frame for bottom of box.
3.Cut 4 – 6 6/8 X 1 ½ in rectangles out of cardboard. (label these pieces "6.75") frame for top of box.
4.Score all 8 rectangles on “one long edge” and “one short edge” of each rectangle, ½ inch.
If you are using heavy cardboard, you only need to score lightly “once” with your cutter.
DO NOT BEND BACK AND FORTH.ONLY BEND ONCE TO FORM BOX EDGE.
NOTE: VERY IMPORTANT
Make sure all your cuts and score lines are scored on the "same end" of each piece, this is necessary for when you piece your box frame together.
5. With your 4 scored “6.5” rectangles, glue them end to end to form a square. Set aside. ( One scored edge to a straight edge, one scored edge to the another straight edge until all four pieces are connected, join together to form a square).
6.With your 4 scored “6.75” rectangles, glue all your short end edges, end to end to form a square.
Set aside.
7.Glue and center your “6.5” rectangles to the bottom of your 7 X 7 inch squares. Let dry.
8. Glue and center your “6.75” rectangles to the heart shaped 7 X 7 inch square. Let dry.
9.Paint your box, set aside to dry.
10.Cut your transparency into a 6 1/4 X 6 1/4 inch square, adhere rub-on’s or embellish into desired design!
11.Put double side sticky tape on your transparency close to the outside egde as possible, the part that will be facing out and attach to the backside of the heart shaped lid.
12.Ink your box edges.
13.Add ribbon, buttons, rub-ons to the outside of your box as desired.
14.The box can be lined with patterned paper, felt or tissue paper.
Valentine Template
|
Subscribe to:
Posts (Atom)